The heavy duty drawer slides are made from rolled steel to support loads up to 90kg. Available in sizes from 400mm to 700mm, with full extended lengths up to 1,400mm.
They provide smooth and controlled movement via ball bearing runners, making access to your stored items easy. The detent-in feature helps hold the drawer in its closed position. The slides are built for heavy loads. The full extension lets the drawer open all the way, so you can reach everything inside.
Made of steel, these slides work well for pull out shelves, kitchen drawers and cabinets, tool boxes, tool storage, filing cabinets, RV and camper drawers, van conversion drawers, electronic equipment cabinets, warehouses and garages. Each order comes with a pair of slides, ready to mount.
Key features:
- Suitable for Side Mounted applications up to 90kg.
- Detent-in: holds the drawer in its closed position.
- Triple telescopic fully extendable for full drawer access.
- Ball bearings ensure smooth movement.
- Made from 2mm thick steel.
- Sold as a pair (can be installed on either side).
- Zinc plated (Cr3+): The top layer of the heavy duty slider is coated with zinc followed by a chromium protective layer. This allows the steel to protect against rust and corrosion.
- RoHS compliance: The finish meets the EU/UK standards of not using hazardous substances for the finish.
- 72 hours NSS test: Simulating salt conditions to provide a better finish and to avoid long term corrosion.
Specifications:
- Material: Steel
- Ball bearing material: Carbon steel
- Height: 51.9 mm
- Width: 12.9 mm (+0.4/0mm)
- Max load: 90kg rated per pair for side mounting
- Finish: Zinc Plated, RoHS compliant
- Screws not included
|
Closed Length |
Open Length |
Load Capacity |
Height |
Width |
Weight per Pair |
|
400mm |
800mm |
90kg (200lbs) |
51.9mm |
12.9mm |
1.8 kg |
|
450mm |
900mm |
90kg (200lbs) |
51.9mm |
12.9mm |
2.0 kg |
|
500mm |
1000mm |
90kg (200lbs) |
51.9mm |
12.9mm |
2.2 kg |
|
550mm |
1100mm |
90kg (200lbs) |
51.9mm |
12.9mm |
2.5 kg |
|
600mm |
1200mm |
90kg (200lbs) |
51.9mm |
12.9mm |
2.7 kg |
|
650mm |
1300mm |
90kg (200lbs) |
51.9mm |
12.9mm |
2.9 kg |
|
700mm |
1400mm |
90kg (200lbs) |
51.9mm |
12.9mm |
3.2 kg |
Please note that there will be a tolerance of ± 3mm on the extended length and screws not included.
How to choose your drawer slides:
- Estimate your drawer’s maximum weight capacity.
- Measure the depth of the cabinet or installation location.
- Allow a small gap for clearance at the back of the drawer.
- Check that the slides can be mounted to your drawer using screws.
Recommended Screws:
- M4 button head screws
- #8 truss head screws
