These drawer slides are constructed from rolled steel to support loads of up to 120kg. Available sizes from 400mm to 700mm, with full extended lengths up to 1,400mm. The heavy duty sliders provide smooth and controlled movement via ball bearing runners, making access to your stored items easy.
The lock allows the slides to be locked in either the fully extended position or closed. Push the lever down to unlock; release to lock it. The latch measures 35mm and sits at the front of the slides. The slides are built for heavy loads. The full extension lets the drawer open all the way, so you can reach everything inside.
Made of steel, these slides work well for pull out shelves, kitchen drawers and cabinets, tool boxes, tool storage, filing cabinets, RV and camper drawers, van conversion drawers, electronic equipment cabinets, warehouses and garages.
Each order comes with a pair of slides, ready to mount. The side locks securely keep your drawers closed providing stability during use or while moving.
Key features:
- Suitable for Side Mounted applications up to 120kg.
- Locking system: in fully extended position or closed position.
- Triple telescopic fully extendable for full drawer access.
- Ball bearings ensure smooth movement.
- Made from 2mm thick steel.
- Lever size: 35mm.
- Sold as a pair (Left and Right).
- Zinc plated (Cr3+): The top layer of the heavy duty slider is coated with zinc followed by a chromium protective layer. This allows the steel to protect against rust and corrosion.
- RoHS compliance: The finish meets the EU/UK standards of not using hazardous substances for the finish.
- 72 hours NSS test: Simulating salt conditions to provide a better finish and to avoid long term corrosion.
Specifications:
- Material: Steel
- Ball bearing material: Carbon steel
- Height: 56 mm
- Width: 19.1 mm (+0.4/0mm)
- Max load: 120kg rated per pair for side mounting
- Finish: Zinc Plated, RoHS compliant
- The lever has a measurement of 35mm
- Screws not included
Closed Length | Open Length | Load Capacity | Height | Width | Weight per Pair |
400mm | 800mm | 120kg (264lbs) | 56mm | 19.1mm | 2.3 kg |
450mm | 900mm | 120kg (264lbs) | 56mm | 19.1mm | 2.6 kg |
500mm | 1000mm | 120kg (264lbs) | 56mm | 19.1mm | 2.9 kg |
550mm | 1100mm | 120kg (264lbs) | 56mm | 19.1mm | 3.2 kg |
600mm | 1200mm | 120kg (264lbs) | 56mm | 19.1mm | 3.5 kg |
650mm | 1300mm | 120kg (264lbs) | 56mm | 19.1mm | 3.8 kg |
700mm | 1400mm | 120kg (264lbs) | 56mm | 19.1mm | 4.2 kg |
Please note that there will be a tolerance of ± 3mm on the extended length and screws not included.
How to choose your drawer slides:
- Estimate your drawer’s maximum weight capacity.
- Measure the depth of the cabinet or installation location.
- Allow a small gap for clearance at the back of the drawer and also take into consideration the 35mm locking lever at the front.
- Check that the slides can be mounted to your drawer using screws.
- The heavy duty slides with lock can be installed with the locking lever facing up or down, if you prefer push down or lift up to unlock. Same functionality both ways.
Recommended Screws:
- M5 flat head screws
- #10 flat head screws
